Accueil » Our filtration solutions » Wall spray booths

Wall spray booths

With over 30 years of experience in air handling and filtration, Technicis filtration offers custom exhaust wall spray booths, sized to comply with standards for paint or sanding booth, with the appropriate filter type based on the application. The suction power is calculated to meet the requirements and standards of Carsat, whether you are a craftsman or an industrial company (airflow speed of m/s. Up to three additional filter levels can be adapted inside the unit for guaranteed filtration efficiency of fine or dry particles. It is also possibe to install an activated carbon filter to reduce odor emissions and VOCs.
Since 1992, Technicis Filtration has been a French manufacturer of filters and spray booths, specializing in air filtration for surface treatments and coatings.

Mur aspirant cabine de ponçage - fabrication et montage Technicis Filtration - Filtres cadre carton fibre de verre plan 2

Cabine de peinture mur aspirant 2m x 2,20m - realisation TECHNICIS FILTRATION

Cabine de peinture Paint Module simple - mur aspirant fabrication Technicis.com 1

Cabine de peinture Paint Module double - mur aspirant fabrication Technicis.com 1

Cabine de peinture - caisson aspirant fabrication Technicis.com

Sortie air gainage - Mur aspirant cabine de ponçage - fabrication et montage Technicis Filtration 3

Features

Heights/Widths

Width : 1m to 3m x Height : 2m to 2.50m
It is possible to double a unit for a total width of 6m or 7m for example

Raw Material

Exhaust Unit with Galvanized Sheet Metal extension
Centrifugal Fan with Double Inlets
Electric motor

Operating Specifications

Motor Power : From 1.1kw to 4kw (depending on booth size)
Power Supply : 380v (220v available only for 1,1kw power)
Air outlet ducting : from 400 to 710mm (depending on airflow rate)
Natural Air Inlet : Required in the room where the booth will be installed

Performances

Suction Flow : from 2500 to 20000m3/h (depending on the booth size)
Regulatory uction Speed: 0.5m/s

Other features

Low Noise and Vibration: High-performance double inlet fan
Delivered in kit form (assembly available upon request)
Manufactured in Nantes

Applications

WOOD : Varnish / lacquers on furniture / Joinery / cabinet making / Luthiery / Musical
METAL : Painting on classic car parts / Car rims / bicycle Frames / Helmets / Brass Plates // wrought Iron / electric Motors / Goldsmithing
PLASTICS : Painting/ Metallization on Prototypes / models / 3D Printing
COMPOSITES : Spraying of Polyester Resins / Gelcoat/ simultaneous projection
GLASS : Glass Painting / Decoration / bottle Coating
LEATHER/SKINS : Pigmentation /tanning

Variants

Custom box width and height
Custom depth of extension

Options

Exhaust Unit : available as standalone or with an extension
Atex Fan : (depending on the application)
Control Box : simple start/stop with thermal protection or complete « Carsat» electrical cabinet
Filtration Kit : For installation of up to 3 filtration levels
Adhesive Film : for protecting cabin walls
Differential Pressure Switch : For detecting filter clogging
Filter consumables

Compliance with standards

Regulatory Suction Speed :0.5m/s as required by Carsat
ATEX Fan available : For applications invloving solvent-based or flammable products
Filter Adaptation : Filters tailores to the application to reduce external emissions (solid particles and VOCs)

Technicis in a few words

Since 1992, TECHNICIS FILTRATION has established itself as the French leader in the manufacturing of paint booth filters, specializing in pleated cardboard filters.

Experts in the filtration of overspray and mist generated in industrial spray booths and surface treatment environments, we develop and offer a wide range of filters tailored to all finishing processes on wood, metal, plastic, composite, glass, or leather, compatible with all brands of installations.

We also design custom exhaust units and extraction walls, engineered to efficiently capture and filter overspray and mist in industrial environments.

Wall spray booths